Standard End Flap
HD 18oz Vinyl Fabric or Lightweight Fabric
#4 Brass Grommets around the Hem
Lots of Dee Ring Tie-Downs above the Hem
Double Lock Stitched Construction, Welded Seams
Manufactured in our Perrysburg Ohio Facility
*Choice of Colors

MACHINERY TARPS

"Machinery Tarps" are best for covering large irregular sized loads such as manufacturing equipment. Machine tarps are usually at least 24' wide and 30' Long so they will cover a large machine with one tarp.  End flaps are optional depending on user preference and size of the loads being hauled.

Since it's usually impossible to determine in advance what size is needed, it's best to get a large rectangular tarp that can be turned sideways for different configurations.  Lots of Dee Rings Tiedowns are recommended.

We put #4 brass grommets all around the hem plus several rows of dee rings sewn every 24" under continuous rows of 2" seatbelt webbing and spaced 30 inches apart aboove the edge (hem) on all 4 sides of the tarp. If in doubt order an extra set of dee rings on your tarp and carry plenty of padding material to help with tarp tie-down on odd sized-loads.

LIGHTWEIGHT FABRIC is available for the side drops on machine tarps, but is not recommended due to the nature of the product being transported.  As always, call us at 1-877-999-8277 to get a quote on your special design.  Custom tarps are what we do!